Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
TECHNICAL DATA
Parameter
Parameter value
description
Product name
BOTTLE JACK
MSW-
MSW-
MSW-
MSW-
Model
BJ15
BJ16
BJ20
BJ10
152
124
Dimensions [mm]
145x118x227
x124
x106
x235
x225
Weight [kg]
7,4
7,1
8,7
4,8
Lifting capacity [T]
15
16
20
10
Lifting height/
[mm] [actuator
150
153
160
155
+ support
+80
+80
+60
+80
adjustment]
Minimum height
227
235
222
[mm]
Maximum height
457
445
447
[mm]
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear foot protection.
ATTENTION! Hand crush hazard!
PLEASE NOTE! The drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
6
U S E R M A N U A L
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to BOTTLE JACK.
2.1. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
c)
Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make repairs
yourself!
d)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
f)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
g)
Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
and
must be passed on with it.
h)
Keep packaging elements and small assembly parts in
a place not available to children.
i)
Keep the device away from children and animals.
j)
If this device is used together with another equipment,
the remaining instructions for use shall also be
followed.
REMEMBER! When using the device, protect children
and other bystanders.
2.2. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The machine may be operated by physically fit
persons who are able to handle the machine, are
properly trained, who have reviewed this operating
manual and have received training in occupational
health and safety.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d)
Use personal protective equipment as required
for working with the device, specified in section 1
(Legend). The use of correct and approved personal
protective equipment reduces the risk of injury.
e)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
f)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
Rev. 18.03.2021
g)
The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
h)
The device is only used for lifting and lowering
vehicles. Do not leave the vehicle raised on the device
for a long time and do not work under the raised
vehicle!
i)
Make sure that no operating fluids leak out after the
vehicle is lifted, i.e. after its stable position is changed.
j)
Do not move the jack with the vehicle lifted on it!
2.3. SAFE DEVICE USE
a)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
b)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of the
device. If damage is discovered, hand over the device
for repair before use.
c)
Keep the device out of the reach of children.
d)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
e)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
f)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country where
the device will be used.
g)
Clean the device regularly to prevent stubborn grime
from accumulating.
h)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
i)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
j)
Keep the device away from sources of fire and heat.
k)
Do not overload the device.
l)
Do not use the device if there is insufficient or no oil in
the cylinder.
m)
Use the device only on a firm, level surface with
a gradient of not more than 3 °.
n)
Before lifting the vehicle, it must be immobilized -
engage the hand (parking) brake, leave the manual
gearbox in 1st or reverse gear (in automatic gearbox
- on the "P" - park) and put special wedges under the
wheels that will stay in contact with the ground after
lifting. This will prevent uncontrolled movement of the
vehicle and possible fall from the jack.
o)
When choosing the proper places on a vehicle to
apply the jack, follow the vehicle manufacturer's
recommendations. This will ensure safe operation and
prevent possible damage to the chassis.
p)
The jack is intended only for lifting a part of the
vehicle - never lift the entire vehicle.
Rev. 18.03.2021
EN
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is used to partially raise or lower vehicles.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
2
3
1
4
5
6
1.
Pumping mechanism with a lever socket
2.
Saddle
3.
Handle
4.
Oil plug (the picture below)
5.
Base
6.
Release valve
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The ambient temperature must not exceed 45°C and the
relative humidity should not exceed 85%. Keep the device
away from any hot surfaces. The device should always be
used when positioned on an even, stable, clean, fireproof and
dry surface, and be out of the reach of children and persons
with limited mental and sensory functions. Before the first
use, check the condition of the device – for visible damages
and/or for hydraulic oil leakage. It is recommended to check
the correct operation of the device first without a load.
ASSEMBLING THE APPLIANCE
The device is delivered ready to use, and only the pumping
lever consisting of 3 elements requires installation. One
should be sticked inside the other.
7
Publicité
Table des Matières
