Information Codes; Technical Data - Samsung NZ24T4360RK Manuel D'utilisation

Information codes

Information code Possible cause
The button is touched for
d0
more than 8 seconds.
The touch-enabled IC
F2
communicates abnormally.
An element's sensor may
C3
be wrong
OM_NZ24T4360RK_EN.indd 25

Technical data

Technical data
Solution
Clean moisture on the buttons
and remove any object on
them.
If the problem continues, touch
the Power button to restart the
cooktop.
If the problem is not solved
after following the solutions,
contact a local Samsung service
center.
Restart the appliance using the
Power button. If the problem
continues, disconnect power
for more than 30 seconds.
Then, restart the appliance. If
the problem is not solved after
following the solutions, contact
a local Samsung service center.
Cool the cooktop down until the
error disappears. If the problem
is not solved after following
the solutions, contact a local
Samsung service center.
Width
Appliance dimensions Depth
Height
Width
Worktop cut - out
dimensions
Depth
Maximum connected load power
Net
Weight
Gross
23 / " (600 mm)
5
8
20 7 / " (520 mm)
16
3 / " (86 mm)
3
8
22"-22 / " (558 mm - 562 mm)
1
8
18 / "-19" (478 mm - 482 mm)
13
16
240 V, 60 Hz : 3.5 kW
208 V, 60 Hz : 2.6 kW
11.0 kg
13.8 kg
English 25
2020-06-19 4:14:36