Advanced Setup - PURE Jongo S340B Mode D'emploi

Advanced setup

If your wireless network is not broadcasting an SSID, you will need to
configure your wireless settings manually.
1. Click the Advanced button to open the Advanced window.
2. Enter the SSID of your router and select the encryption type of your
wireless network from the drop-down list below.
Note: Please check your wireless router configuration to find out
the type of encryption that is being used on your wireless network.
3. Enter the key/password needed to connect to your network in the
box below, if one is required.
4. Choose whether to assign a Static IP or DHCP IP address to
Jongo by clicking the appropriate radio button. If assigning a static
IP address, enter the IP address settings in their respective fields.
5. Click Connect. Jongo will restart and switch on in Wi-Fi
Connected mode.
You will now be able to stream audio from your smartphone or tablet
(see page 13 for more information).
18