Using Bluetooth; Using The Auxiliary Input; Connecting An Auxiliary Device - PURE Jongo S340B Mode D'emploi

Masquer les pouces Voir aussi pour Jongo S340B:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using Bluetooth

You can also stream audio to Jongo from a Bluetooth device.
Note: The procedure for adding a Bluetooth device varies on different
mobile devices. See your Bluetooth device manual for specific information.
Preparing Jongo to stream audio using Bluetooth
1. Ensure that the Bluetooth adapter is inserted into Jongo's USB connector.
2. Enable the Bluetooth option on your mobile device.
3. O
your mobile device, select the option to add a new Bluetooth device. On
n
some mobile devices you may need to select the search or scan option.
4. Start the pairing process on your mobile device. Do this by selecting
Jongo from the list of available devices that appear on the mobile device's
screen. This will connect automatically once paired.*
5.
When Jongo has successfully paired and connected with your mobile
device, the Bluetooth icon will show on the rear display panel.
You will now be able to start streaming audio to Jongo from your
Bluetooth device.
Note: You will need to disconnect any connected Bluetooth devices
from Jongo to stream using Wi-Fi or to stream from a different Bluetooth
device. Bluetooth will automatically disconnect if you go out of range of
Jongo. To manually disconnect you will usually need to go through your
Bluetooth settings on your mobile device.

Using the auxiliary input

Connecting an auxiliary device

Connect the line out or headphone socket of your auxiliary device to
the Aux in socket on your Jongo using a suitable cable. Jongo will
automatically play any track that is playing on the auxiliary device.
Note: Any audio that you stream to Jongo will interrupt any audio
currently playing on a device connected to the auxiliary input. To
restart auxiliary playback, disconnect and reconnect the auxiliary
cable. Alternatively, use the power button to switch Jongo between
Sleep and On. See page 8 for more information.
*Some legacy Bluetooth devices may prompt you to enter a passcode when trying
to pair with Jongo. If this occurs, enter the code 0000.
14

Publicité

Chapitres

Table des Matières
loading

Table des Matières