Switching Between Sleep, On And Off; Power Light States; Network Setup - PURE Jongo S340B Mode D'emploi

Switching between Sleep, On and Off

Jongo has three power states, Sleep, On and Off. In Sleep, Jongo
remains connected to the wireless network and waits to receive audio.
If the Bluetooth adapter is inserted, Jongo is also ready and waiting
to receive Bluetooth pairing / connection / playback requests in Sleep
(Power light is amber).
To enter Sleep, briefly press the Power button (Power light turns
amber).
Once in Sleep, press the Power button to switch to On (Power light
turns green).
To turn Jongo off, hold the Power button until Jongo turns off.
Note: If you press the Power button and Jongo is being powered
by the ChargePAK F1, Jongo will power off and not enter the Sleep
power state.

Power light states

The Power light on Jongo is also used to indicate the various states of
Jongo, by color.
Green
Red
Amber

Network setup

Jongo can be connected to your network using a wireless or wired
connection.
We recommend using the wireless connection method, which allows
you to position your Jongo anywhere within range of your wireless
network. See page 9 for more information.
If you want to use the wired connection method, you will need to
remove the Bluetooth adapter and plug in an optional Pure USB
Ethernet adapter. See the Pure website for more information.
8
(Pulsing) Indicates that Jongo is preparing to stream audio.
Also indicates that Jongo is busy connecting to a wireless
network.
(Pulsing) Indicates that Jongo is booting up.
(Flashes twice) Indicates that you have tried to increase
the volume but Jongo is already at maximum volume.
(Flashes continuously (slowly)) Indicates that Jongo is
in Wi-Fi Setup mode.
(Flashes continuously (rapidly)) Indicates that Jongo is
waiting for a file before carrying out a software upgrade.