Connecting Jongo To Your Wireless Network Using Push Button Configuration; Manually Connecting Jongo To Your Wireless Network; Stage 1: Connecting Your Setup Device To Jongo - PURE Jongo S340B Mode D'emploi

Connecting Jongo to your
wireless network using
Push Button Configuration
You can use Push Button Configuration to connect Jongo to you
wireless network if WPS is supported by your router. Refer to your
router user guide for more information on WPS.
1. Press the WPS button on your router.
2. Press and hold the WiFi button on Jongo. Jongo's Power light will
pulse green while Jongo attempts to connect to your network.
3. When Jongo's Power light is steady green, Jongo has successfully
connected to your network using Push Button Configuration. You will
now be able to start streaming tracks to Jongo. See page 13.
Note: The WPS function in some WPS-compatible routers may be
disabled by default. Consult your router documentation for more
information.
Manually connecting Jongo
to your wireless network

Stage 1: Connecting your setup device to Jongo

In the first setup stage you need to establish a temporary wireless
connection between your setup device (iPod touch, iPhone, iPad,
laptop or Android device) and Jongo. Your setup device needs to
include a web browser and support a Wi-Fi connection.
Carry out the following to create a temporary wireless network to
connect Jongo to your iPod touch, iPhone, iPad, laptop or Android
device:
1. Ensure that Jongo is in Wi-Fi Setup mode (see page 6 for more
information).
2. On your setup device (iPod, iPhone, iPad or Android device etc),
the Jongo S340B ****** wireless network should now be visible.
Select this network. No password is required.
3. Once you have connected to the Jongo S340B ****** wireless
network, you can access the Jongo Setup Manager on your setup
device's web browser. Use Jongo Setup Manager to add Jongo to
your own wireless network.
10