Stage 3: Adding Jongo To Your Wireless Network - PURE Jongo S340B Mode D'emploi

Stage 3: Adding Jongo to your wireless network

Jongo will automatically scan for available networks. If you want to
enter your wireless network settings manually see page 18.
Note: You may need to manually enter your wireless network settings
if your wireless network has a hidden SSID.
1. Select the name of your own wireless network from the list of
Available networks. The encryption method will be automatically
detected.
2. If required, enter the security key used by your network.
3. Click Connect. Jongo's Power light will pulse green while Jongo
attempts to connect to your network.*
4. When Jongo's Power light is steady green, Jongo has successfully
connected to your network. You will now be able to start streaming
tracks to Jongo. See page 13. If the Power light flashes red,
there is a problem with Jongo's network connection. Check that
you have entered your network settings correctly and repeat the
steps outlined in "Manually connecting Jongo to your wireless
network" on page 10.
Note: We recommend that you contact your IT department before
attempting to connect Jongo to a corporate wireless network.
12