Before Each Use; Monthly Maintenance - Uline H-8928 Guide Rapide

WARNING! Never use the dumper if any
damage or unusual motion is observed, if
it is in need of repairs, or if it seems to be
malfunctioning.
WARNING! Care should be taken to identify all
potential hazards and comply with applicable
safety procedures before beginning work.
Only qualified individuals trained to understand
mechanical devices and their potential movements
and hazards should attempt troubleshooting and repair
of this equipment.
Repairs must only be performed by suitably trained
personnel with access to the appropriate equipment
and tools.

BEFORE EACH USE

Inspect for the following:
1. Frayed or damaged pull cable.
2. Damage or structural deformation to the hopper, or
the dumper's frame.
3. Proper locking of the latch lock bracket.
4. Unusual noise or binding while dumping, or
evidence thereof.
5. Evidence of fatigue or damage to the securing
chain, its attachment point, or its quick-link.
PAGE 5 OF 15
OPERATION CONTINUED
Notify supervisor or maintenance personnel if anything
seems out of the ordinary.
Ensure all safety and warning labels stay in place and
are legible. Refer to the warning labels section.
MAINTENANCE

MONTHLY MAINTENANCE

Inspect for:
1.
2. Integrity of all pivot point pins.
3. Looseness, wear or damage to the casters' bearings,
4. Proper functioning of the releasing mechanism.
5. Unusual noises or movement when dumping.
6. All the information, safety and warning labels are in
7.
1-800-295-5510
uline.com
Pivot point wear.
mounting hardware or surface material
(portable units only).
place and in good condition.
Dirt and debris in any area that could affect normal
operation or dumping motion.
1221 IH-8928