Uline H-8928 Guide Rapide page 3

5. Align release rod with lock release lever and install
the small clevis pin and small cotter pin.
(See Figure 4)
6. Install bumper plate onto fork pocket base using
long clevis pin and cotter pin. (See Figure 5)
7. Slide large clevis pin through bumper plate and fork
pocket base. Attach large cotter pin.
8. Rotate dumping hopper back to the upright position.
(See Figure 6)
NOTE: Ensure lock release lever engages and
chute latches properly.
PAGE 3 OF 15
QUICK-RELEASE ASSEMBLY CONTINUED
Figure 4
Small
Cotter Pin
Figure 5
View From
Front Side
Large
Cotter Pin
Large
Clevis Pin
Figure 6
View From
Forklift Side
Small
Clevis Pin
Bumper Plate
1221 IH-8928