cecotec FORCE CLIMA 12750 Manuel D'instructions page 24

ENGLISH
21. Remote control
22. Drainage hose
Fig. 4
1. Oscillation button: Press the oscillation button to change the direction of the air stream.
2. Timer button: Press this button for activating the device´s timer. The timer can be activated
when the device is on or off. When the button's symbol lights up, press up and down to select
the desired timing. Time can be adjusted from 1 to 24 hours and at intervals of 1 hour.
3. Speed regulator button: Press this button when in cooling, heating or ventilation mode
to choose between high, medium and low speed. This function is not available in night and
dehumidifying mode.
4. Temperature/timer increasing button: Press this button to adjust time upwards, after having
pressed the timer button; and also to increase temperature when in cooling or heating mode.
This function is not available under fan or dehumidifying mode.
5. Screen
6. Temperature/timer decreasing button: Press this button to adjust time downwards, after
having pressed the timer button; and also to decrease the temperature, when in cooling or
heating mode. This function is not available under ventilation or dehumidifying mode.
7. Mode selector button: Press the mode selector button to switch between the ventilation,
cooling, heating and dehumidification mode.
8. Night mode button: The device will work on energy-saving mode and at the lowest speed.
Press this button again to finish the night mode. When in cooling mode, the temperature will
increase 1 ºC every hour. Night mode is not available under dehumidifying and ventilation
mode.
9. Power button: Press the power button to turn the device on or off.
Fig. 5
1. Power button: Press the power button to turn the device on and off.
2. Mode selector button: Press the mode selector button to switch between ventilation,
cooling, heating and dehumidification mode.
3. Temperature/timer increasing button: Press it to increase the temperature and to set the
desired operating time.
4. Temperature/timer decreasing button: Press it to decrease the temperature and to set the
desired operating time.
5. Speed regulator button: Press the speed regulator button to set the speed between high,
medium or low speed.
6. Timer button: Press the timer button to set the duration of the operating time.
7. Oscillation button: Press the oscillation button to change the direction of the air stream.
8. Temperature unit button: Press the temperature unit button to choose the measure unit of
temperature (Celsius or Fahrenheit).
9. Night mode: Press it to turn on or off the night mode. The device will work in energy-saving
23
FORCE CLIMA 12750 COLD&WARM CONNECTED / FORCE CLIMA 14750 COLD&WARM CONNECTED