Moffat MCCH6110HSS Mode D'emploi page 26

Failure
Laundry is stained
after washing.
White powdery
residues on the
laundry.
Detergent residues in
the dispenser.
Softener is not
completely rinsed,
or water is left in the
dispenser dish.
Washing time is
longer than usual.
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
26
Possible cause
You used liquid detergent or
detergent for colored laundry
which does not contain whitener.
It is not the consequence of bad
rinsing, but because of neo-
phosphate detergents containing
non soluble components
(zeolites) for water softening.
Such substances may be
deposited upon the laundry.
Low water flow pressure.
Some detergents may stick to
the dispenser rather hard if it is
wet.
Syphon cover is not correctly
positioned or is clogged.
• The machine switched on
the UKS* system because of
uneven laundry load.
• Power failure occurred.
Remedy
Use the detergent containing
whitener.
Immediately rinse the laundry once
again.
• Use liquid detergents which do not
contain zeolites.
• Try removing the residues with the
brush.
• Clean the inlet hose filter screen.
• In case of low water pressure
increase water level.
• Wipe the dispenser prior loading
detergent.
Clean the dispenser and firmly fix the
cover to its place.
• Washing program time may be
prolonged for 10 minutes and the
machine still functions perfectly.
Time is prolonged for the power
failure period.