Moffat MCCH6110HSS Mode D'emploi page 18

Interruptions
18
•
By the user
Selecting Rinse Hold function
Program is stopped when it comes to the 'RINSE
HOLD' stage (if this function had been previously
selected). Drum door remains closed all the time.
Indicator LED above the 'Rinse hold' function
starts flashing. Washing procedure is continued by
pressing the START button (C).
Own (physical) interruption
You may also stop the program by turning the
program selector to the position "0". If there is
water in the drum select one of additional programs
(draining, spinning) to empty the water and
terminate the program.
Pause button
By pressing the PAUSE button, (C) the program
may be suspended at any time. After certain time
you may open the door if there is no water in the
drum, otherwise this is not possible. Program is
continued by pressing the START button (C).
•
Failures
Program is suspended in case a failure occurs.
Signal LED's are flashing (see Troubleshooting).
•
Power failure
At electric cutout the program is interrupted,
however, after the power supply has been re-
established, the program operation automatically
proceeds.
If a power failure occurs when the drum is
still full of water, be careful not to open the
door before you drain the water out.