Drain Only - Moffat MCCH6110HSS Mode D'emploi

•
The selected program is completed by pushing
the START button (C). You may also apply partial
programs (drain or spin only), by first returning
the program selector to the "0" position for at least
one second, then selecting any of the additional
programs.
When program continues, indicator LED above
the knob turns off.
- Selection of partial programs
These are independent programs and may be used
when you do not need the entire washing program.
In case you would like to use more additional
programs in a sequence, you must turn off the
appliance prior to any new program selection (turn
the program selector (A) to "0" for at least one
second). Refer to Program Chart page 27.
Gentle
Independent program for rinsing delicate laundry,
without intermediate spinning and with short final
spin. You may use it for rinsing manually washed
delicate laundry or for extra rinsing for people with
skin sensitive to detergents.
Rinse & spin
This program is intended for softening or bleaching
washed laundry. It finishes with spinning at 1000
RPM.

Drain only

Use it when the washing program was interrupted
or if rinse hold function was engaged, and you only
wish to pump the water out of the drum, without
spinning.
Spin only
Aggressive spinning for non-delicate laundry at high
spin RPM.
15