Moffat MCCH6110HSS Mode D'emploi page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Washing machine
operation
- Open the door of the machine.
Door is opened by pulling the handle (lever) on
the right hand side of the door towards you.
- Sort the laundry by the type of fabric.
Fasten buttons and zippers, tie any strings
and pull out the pockets.
Very delicate laundry should be put in a
special protective sack.
It is recommended to load the drum with
items of different sizes.
Pay attention to the labels on the clothes,
indicating the recommended washing mode
(see table of textile treatment symbols on the
last page of these instructions).
- Load the laundry into the drum.
- Close the door of the appliance.
- Open the water inlet faucet.
- Push the ON/OFF button and select washing
program.
Program is selected by turning the program selector (A)
from the "0" position to the desired washing program.
The ON/OFF signal LED starts flashing. The program
selector (A) may be turned in both directions. Choose
the appropriate program according to the type of
laundry and desired temperature. For example, cottons
and 95°C (Refer to the Program Chart on page 27).
You may select basic or partial programs.
Selected program may be changed at random prior
pushing the START button (C).
- Selection of basic programs ( ,
Basic programs include all washing stages, softening
and spinning (see Program Chart). They are selected
by turning the program selector to the appropriate
position, including temperature selection.
,
,
)
1

Hide quick links:

Publicité

Chapitres

Table des Matières
loading

Table des Matières