Transport; Electrical Current; Technical Data; Type Key - evenes EV-ZUP 15 PLUS Notice De Montage Et De Mise En Service

1 | SAFETY
1.6

Transport

Unpack and check the pump and all accessories upon receipt. Report any damage sustained in transit
immediately. Dispatch the pump in the original packing only.
1.7

Electrical current

There is a danger of an electric shock when working with electrical current. Therefore:
• Switch off the power before beginning work on the pump and make sure that it cannot be switched on again
accidentally.
• Do not kink or nip the power cable or allow it to come into contact with heat sources.
• The pump is protected against drips in accordance with protection class IP 42. Protect the pump against
water spray. Do not immerse in water or other fluids.

2 | TECHNICAL DATA

2.1

Type key

EV ZUP Series: Standard secondary hot water circulation pump, glandless pump
15 Plus Type designation
2.2

Connections

EV ZUP 15 Plus (Fig. 1)
Screwed connection: DN15 (1/2" IG)
2.3

Data

Mains voltage
Protection class
Nominal diameter of connecting pipes
Installation length
Max. permissible operating pressure
Permitted fluid temperaturerange
Max. ambient temperature
Max. permitted hardness in secondary hot water
circulation systems
See name plate or catalogue for further information.
in short-term operation to 2 hours +70 °C
SECONDARY HOT WATER CIRCULATION PUMP EV-ZUP 15 PLUS
EV ZUP 15 Plus
1 ~ 230 V / 50 Hz
IP 42
R ½
84 mm
10 bar
+2°C to +65 °C,
+40 °C
20° dH
17