Gardeo GBV2600SWB Traduction Des Instructions D'origine page 27

machine to cool down before making any
inspections, adjustments, etc.
 The shredded can be packed in the collection box
for storage and transport. Follow below steps:
a) Unlock the collection box by pushing the safety
switch downwards. (Fig. 10-2)
b) Release the location plate by loosing the two
screws. (Fig. 9)
c) Stand and put hands in position as shown in Fig.
12.
d) Push the motor unit horizontally to move
protruding supports (Fig. 8/Item B) away from slots
(Fig. 8-2/Item A) of the base frame.
e) Put the motor unit down into the collection box.
(Fig. 8-2))
 Store the machine in a dry place. For extended
storage periods, run the unit dry for a short time.
Always allow the machine to cool down before
storing it.
 When servicing the chopping knife assembly be
aware that, even though the motor will not start due
to the interlock feature of the guard, the chopping
knife assembly can still be moved by a manual
starting mechanism.
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our after-sales
service department.
_ If replacing the power cord is necessary, it should
be done by the manufacturer or his agent to avoid a
hazard.
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable and
secure position, in a cool and dry place, avoid too high
and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it in the
dark, if possible.
_ Don't keep it in plastic bags to avoid humidity build-up.
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Should your machine need
extended use, do not put it in
the domestic waste but
environmentally safe way.
replacement after
dispose of it in an
GARDEO
81, rue de gozée
6110 Montigny-le-Tilleul
Belgique
Tél : 0032 (0) 71 29 70 70
Fax : 0032 (0) 71 29 70 86
2012