Maintenance And Cleaning - HAEGER Aquaclean VC-12W.044A Mode D'emploi

Assembly for Accessories

Maintenance and Cleaning

•
Water filter exhaust should always be kept clean. This will let your appliance's suction
power at MAX. level.
•
Unplug your appliance before doing any maintenance or before cleaning. Do not leave
your appliance plugged in.
•
Empty the tank after each function.
•
NOTE: To prevent bad odours, don't leave any liquid in the tank. Clean and keep empty
the tank after each operation.
•
After wet vacuuming function, dry tubes, hose and parts of the motor properly. After
filling out and drying the tank, operate the appliance for a few minutes in order to
prevent bad odours.
•
Do not wash the motor bonnet and do not put it in water. Only clean it by mopping.
•
Clean the tank by mopping or washing.
•
Clean the accessories by mopping or washing.
•
Change paper dust bag with a new one when it gets full.
From time-to-time water filter exhaust should be cleaned to ensure higher
performance. You can wash sponge filters when they get dirty.
After connecting the tubes to the hose handle, attach the
right accessory to the extension tubes.
You can use your appliance without any tube by connecting
the right accessory for your wet & dry vacuuming area
directly to the hose handle.
- 9 -