HAEGER Aquaclean VC-12W.044A Mode D'emploi page 9

Put the top cover back on the tank through holding it from
carrying handle and lock the latches by pushing right and
left.
NOTE: Do not operate your appliance with inner cover
while using dry vacuuming function.
Insert the hose by pushing it into the suction mouth. Attach
the proper accessory and operate your device.
NOTE: Always keep a reserve of dust bag, so that the
vacuum cleaner will be ready for use at any time.
Assembly for wet vacuuming function
Unlock the locking latches pulling outwards as shown in the
picture.
Put the top cover away through holding it from carrying
handle.
The tank should be clean while using wet vacuuming
function.
The dust bag, inner cover and water filter exhaust should
certainly be removed out of the tank.
Put the top cover back on the tank through holding it from
carrying handle and lock the latches by pushing right and
left.
- 7 -