English
3. Clean the filter
– Clean the motor filter in water and allow
them to dry completely before replacing
them.
Care and cleaning
1. Before you cleaning the vacuum cleaner always switch it off and pull the plug out of the
socket.
2. To prevent electric shock do not clean the vacuum cleaner with water and never allow the
vacuum cleaner to be in contact with water.
3. Use a damp or dry cloth to clean the vacuum cleaner. Only clean the housing and the
accessories.
4. The filter for the ventilation air and the internal air filter should be cleaned regularly.
5. Do not use any aggressive cleaning agents or solvents as these may attack the plastic.
Storing
1. Rewind the mains cable fully by actuating the foot button on the vacuum cleaner.
2. Place the vacuum cleaner in the vertical position.
Trouble Shooting
1. Motor does not start
Cause: No power supply
Remedy:
Check cable, plug and socket
2. Insufficient suction power
Cause: Filter, nozzle, suction hose or tube is blocked.
Remedy:
Check if the dust bag needs to be replaced.
Check if the filters need to be replaced.
Check if the slide on the handgrip is closed.
Check if the electronic suction power control is in maximum position.
Check if the nozzle, tube or hose is blocked up.
6
Instructions for use