Publicité
Les langues disponibles
Les langues disponibles
Operation
Choose a light show from 17 of the available settings:
- Toggle light transformer from "On", back to "Off", and back "On" between 2 to 10 seconds.
A new Sync Module will require a sync to be performed between the waterfall and pool lights. Power the transformer
"On" for 1 minute prior to sync. Power the transformer "Off" and wait 14 seconds before power "On". Lights will now be
synched. If power switch is turned "Off" for more than 15 seconds, the Sync Module will store the last running Light
Show. The next time the unit is powered on, the Sync Module will load the last running show within 15 seconds.
Order of Light Show Programming:
1: Voodoo Lounge
2: Deep Blue Sea
3: Royal Blue
4: Afternoon Skies
5: Aqua Green
6: Emerald
7: Cloud White
8: Warm Red
9: Flamingo
10: Vivid Violet
11: Sangria
12: Twilight
13: Tranquility
14: Gemstone
15: USA
16: Mardi Gras
17: Cool Cabaret
Troubleshooting
Issue
Lights are not turning
"On".
Lights are not in sync
Additional questions and product support can be answered by the Hayward Technical Support team at
Cause
Breaker is off or tripped
Possible loose connections
Lights were turned on and
off too quickly
Reset breaker
Secure Sync Module input & out connections
Power transformer "On" for 1 minute prior to sync. Power
transformer "Off" and wait 14 seconds before power "On". Verify
all lights are in sync after 4 seconds. If unsuccessful, repeat sync
procedure (use of a stopwatch is ideal)
1-888-238-7665
Page 3
Remedy
Publicité
