Firmware Update - Medion Powerline MD 87319 Mode D'emploi

NOTE:
After a reset to factory defaults, all the set-
tings and passwords are deleted and must be
re-entered.

11.8. Firmware Update

 If you receive a software update from our service,
save it onto your computer.
 Then click on BROWSE to execute and install the
software update from your computer.
 If your settings are to be retained after the soft-
ware update, clear the check mark next to the en-
try CLEAR CONFIG.
 Click on APPLY to start the installation.
WARNING!
While resetting to factory settings or apply-
ing a software update, never press the RE-
SET button on the Powerline Adapter. This
will lead to a system failure and thus destroy
the Powerline Adapter!
80 of 162