Medion Powerline MD 87319 Mode D'emploi page 75

11.3.5. Passphrase
Here you can assign a network key.
11.3.6. Show encryption key
Shows the network key in the web interface.
 After you have made all the settings, click OK:
11.3.7. WPS
You can use the WPS function (Wi-Fi protected setup) to
add a wireless client to your network without entering
the SSID, encryption and password. To make the con-
nection, you merely need to press the WPS button on
the Powerline Adapter and then on the wireless client.
To be able to use this function, the Wi-Fi client must
support WPS.
11.3.8. Enabled WPS
Here you can turn the WPS function on or off.
11.3.9. WPA Mode
Here you can display the current WPA encryption.
NOTE!
If you enable the WPS function, you must use
one of the encryption types WPA-PSK, WPA2-
PSK or WPA/WPA2-PSK and the SSID must be
transmitted.
The WPS function can be carried out via PBC, PIN and
AP-PIN.
74 of 162