Setup; Unpacking; Compressor Initial Setup Checklist - Invacare HomeFill II Oxygen Manuel D'utilisation

Invacare® HomeFill® II Oxygen System

3 Setup

3.1 Unpacking

14
DESCRIPTION
Compressor Assembly
Packaging Assembly
Supply Line Assembly
Power Cord
User Manual (not shown)
1. Check for any obvious damage to the carton or its
contents. If damage is evident, notify the carrier, or
your local provider.
2. Remove all loose packing from the carton.
3. Carefully remove all of the components from the carton.
Unless the compressor is to be used IMMEDIATELY,
leave the compressor in its packaging for storage
until use of the compressor is required.

3.2 Compressor Initial Setup Checklist

Providers ONLY — Refer to Dealer Information in the
Safety section of this manual before performing this
procedure.
Users ONLY — Contact your Invacare provider or
Invacare for assistance with the setup procedure and
to report unexpected operation or events.
Before operating the HomeFill Compressor for the first time,
complete the following checklist:
q
Choose a location for the compressor.
q
Transport the compressor to the desired location.
A
B
C
D
N/A
1195663-C