Klarstein 10033343 Mode D'emploi page 20

EN
20
Step 5: Insert control box with heating element and power plug
Now insert the control box with
heating element and power plug
correctly into the grill pan.
You will see a square cut-out on
the grill tray where the control box
can be placed.
Hold the control box over this cut-
out as shown in the figure 6 and
slowly lower it until the control box
is in place.
For a secure fit and easy
positioning, the control box has
recesses on the sides that perfectly
fit into the grill pan (see figure 7).
At the same time, the safety switch
is also activated. The appliance
can only be operated if the control
box is located in the intended
place.
If the control box has been
inserted correctly, the strut
connecting the two heating
elements is centred on the
elevation in the water bowl (see
figure 8).
Figure 6
Figure 7
Figure 8