SELFSAT SNIPE 3 Manuel De L'utilisateur page 16

B. Assemble 7pcs of M4x20 bolt to fix the mounting plate
B-1
Place the mounting plate on the silicone and
make 7 holes (2mm) with a power drill
B-3
Assemble seven(7) of M4x20 screw
C. Apply silicone between mounting plate and masking tape
C-1
Apply silicone around mounting plate edges
C-3
Remove masking tape and allow to dry
B-2
Apply silicone on the holes
B-4
Re-apply silicone to cover bolts assembled
C-2
Tidy silicone surface
C-4
Prepare to place the antenna on to the upright
bolts
ENGLISH - 15