Invicta REMILLY Notice Particulière D'utilisation Et D'installation page 11

Masquer les pouces Voir aussi pour REMILLY:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

APPLIANCE INSTALLATION INSTRUCTIONS.
To limit heating the walls neighbouring the wood burner to 65K (K = degrees Celsius above room temperature), the minimum distances
indicated in the diagram below must be followed.
If the neighbouring walls are made from non-combustible materials that are not damaged by heat ( the wall temperature can reach
200°C), these distances can be reduced to 150 mm.
WOOD BURNER INSTALLATION TOP VIEW
Side wall
600 mm
50cm wide, 50 long, 45mm
thick concrete slab covered by a
reflective plate on the appliance
side (ceramic or stainless steel
type)
XD, le 12/02/2020
Wood stove REMILLY
600 mm
Back wall
600 mm
Stainless steel
plate
Concrete slab
Référence: P601384
Code 1
Back wall
Page 3 of 9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

P601384

Table des Matières