Safety Labels - Tennant Orbio Technologies 100−Tb Manuel De Fonctionnement

4. When servicing machine:
− Always stop the machine on a flat
level surface and engage the wheel
lock before dispensing cleaning
solution.
− Disconnect battery.
− All repairs must be performed by a
trained service mechanic.
− Use manufacturer supplied or
approved replacement parts.
− Do not modify the machine from its
original design.
− Wear protective gloves and eye
protection when handling batteries
and battery cables. Avoid contact with
battery acid.
− Do not power spray or hose off the
machine. Electrical malfunction may
occur.

SAFETY LABELS

The safety labels appear on the equipment in the
locations indicated. Replace damaged labels.
100−Tb/200−Tb DM20016 (7−2012)
OPERATION EN
5.When using cleaning solution:
− Do not mix Orbio Multi−surface
Cleaner with conventional cleaning
chemicals.
− Do not drink cleaning solution.
− Refer to MSDS (Material Safety Data
Sheet) for additional safety
information and precautions.
6. When transporting machine:
− Turn the toggle switch to the "OFF"
position.
− Get assistance or use a mechanical lift
when lifting machine
− Do not wheel up or down stairs.
− Do not tilt on rear wheels or front
casters.
− Use tie−down straps to secure
machine when transporting by vehicle.
− Do not expose to freezing conditions.
7. After using machine:
− Store unit with toggle switch in the
"OFF" position.
− Store indoors.
− Do not store in freezing conditions.
FOR SAFETY: Do not operate machine
unless operator manual is read and
understood.
WARNING: Do not push on inclines.
2% maximum grade.
3