Replacing Battery - Tennant Orbio Technologies 100−Tb Manuel De Fonctionnement

EN OPERATION

REPLACING BATTERY

FOR SAFETY: Always stop machine on a flat
level surface and engage the wheel lock
before servicing the machine.
NOTE: Make sure battery charger is disconnected
from battery charger recpticle before replacing
battery.
1. Loosen the two thumb screws on both sides
of the battery box.
2. Lift off the battery box cover.
8
FOR SAFETY: When servicing machine, wear
protective gloves and eye protection when
handling batteries and battery cables. Avoid
contact with battery acid.
3. Disconnect the red positive (+) cables first
then black negative (−) cables from the
battery. Carefully remove battery from
machine.
(−)
4. Install new battery. Connect the black cables
to negative (−) terminal first then red cables to
positive (+) terminal.
5. Dispose of old battery in an environmentally
safe way according to your local regulations.
Contact your local regulatory authorities for
proper transporting and disposal instructions.
Remove battery prior to machine disposal.
Help preserve the environment − Recycle!
100−Tb/200−Tb DM20016 (7−2012)
(+)