Nilfisk GD 111 Mode D'emploi page 9

This appliance is for use on a nominal 120 volt
circuit and has a grounding plug that looks like
the plug illustrated in Figure A.
A temporary adaptor which looks like the adap-
tor illustrated in Figure B may be used to connect
this plug to a two-pole receptacle, as shown, if
a properly grounded outlet is not available. The
temporary adaptor should be used only until
a properly grounded outlet, Figure A, can be
installed by a qualifi ed electrician. The green
colored rigid ear, lug, or the like extending from
the adaptor must be connected to a permanent
ground such as a properly grounded outlet box
cover. Whenever the adaptor is used, it must be
held in place by a metal screw.
NOTE! This temporary adaptor is not permitted in
Canada.
FIGURE A
Grounded outlet box
Grounding blade is the
longest of the 3 blades
INSTRUCTIONS FOR USE
Before using the vacuum cleaner make sure that
the voltage shown on the rating plate on the vac-
uum cleaner corresponds with the main voltage.
This machine is equipped with a thermal cut-out
to protect the motor and other vital machine parts
from overheating. Should the machine cut out,
you will have to wait at least 5-10 minutes for it to
automatically reset. While you are waiting, switch
the machine off and unplug it, then check the
hose, dust bag and fi lters to be sure that nothing
is blocking the fl ow of air through the machine.
WARNING! This machine is not intended for use
with hazardous materials. Doing so may expose
people to serious health risks.
The accessories and equipment shown in the
pictures may vary from model to model.
FIGURE B
Adaptor
Metal
screw
Groundning tab
MAINTENANCE
Always keep the cleaner in a dry place. The
cleaner is designed for continuous work. Depend-
ing on the number of running hours – the dust
filters should be renewed. A dust bag must be fit-
ted in the machine if the vacuum cleaners sack
filter is vacuumed. Keep the container clean with
a dry cloth, and a small amount of spray polish.
For details of after sales service contact Advance
directly.
The size and quality of the dust bag and fi lters
affect the machine effi ciency. Use of non origi-
nal dust bags or non original fi lters can cause
restricted air fl ow which may lead to machine
overload. Using non-original dust bag or fi lters
will void the warranty.
USE ORIGINAL ADVANCE NOZZLES ONLY.
Grounded
outlet box
USE OF NON ADVANCE NOZZLES WILL IN-
VALIDATE THE WARRANTY.
9
ENGLISH