Technical Data Trailer - Dibo JMB-S Mode D'emploi

8.4. Technical data trailer

- Tyres: use only the 155/70 R13 - 155/80 R13 - 165/70 R13 tyres on the trailer.
Specs:
TIRE
155/70 R13
155/80 R13
165/70 R13
175/70 R13
- Maximum weight of the shaft = +- 750 kg, the permissible load per tyre has to be min. 375 kg.
- The trailer is available as a single shaft, braked version or unbraked version.
You are obliged to register the trailer.
- Ambient temperature when in operation: -25 to + 40 ° C, during transport/storage: -25 to + 55° C.
- Relative humidity (RH): 30% to 95%, not condensing
- Torque moments wheel bolts: first check the thread and the bolt quality, see column below.
Thread
M 4
M 5
M 6
M 8
M 10
M 12
M 14
M 16
M 18
M 20
M 24
M 30
- The trailer is equipped with a certificate of conformity by applicable law of the Directive 2007/46/EC and the cor-
responding part guidelines in the European Union. With this certificate, it is possible to register the trailer easily as
final customer. Please note that each Member State maintains its own procedures for registrations.
The trailer has a plate (mounted in front) with the following information:
JMB-S : REV A
LI SS
79 N
84 N
84 N
86 N
4.6 5.6
1 Nm 1.37 Nm
2 Nm 2.7 Nm
3.5 Nm 4 Nm
8.4 Nm 11 Nm
17 Nm 22 Nm
29 Nm 39 Nm
71 Nm 95 Nm
138 Nm 184 Nm
235 Nm 315 Nm
475 Nm 635 Nm
RIM
4J x 13
4J x 13
4J x 13
4.5Jx13
Bolt quality
8.8 10.9
3 Nm 4.4 Nm
5.9 Nm 8.7 Nm
10 Nm 15 Nm
25 Nm 36 Nm
49 Nm 72 Nm
85 Nm 125 Nm
133 Nm 195 Nm
206 Nm 302 Nm
210 Nm 310 Nm
425 Nm 610 Nm
730 Nm 1050 Nm
1450 Nm 2100 Nm
TIRE PRESSURE (BAR)
2.7
2.7
2.7
2.7
12.9
5.1 Nm
10 Nm
18 Nm
43 Nm
84 Nm
145 Nm
229 Nm
354 Nm
365 Nm
710 Nm
1220 Nm
2450 Nm
Name Manufacturer
Vehicle Type approval number
Vehicle identification number
Technically permissible maximum
mass in loaded state
Technically permissible maximum
vertical load on coupling point
Technically maximum mass on the
axle
DiBO n.v. 113