For your safety – pre-operation checks
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition.
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition.
Always follow the inspection and maintenance procedures and schedules described in the Owner's Manual.
Always follow the inspection and maintenance procedures and schedules described in the Owner's Manual.
WARNING
WARNING
EN
Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage.
Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage.
Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the
Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the
4
vehicle inspected by a Benelli dealer.
vehicle inspected by a Benelli dealer.
Before using this vehicle, check the following points:
Before using this vehicle, check the following points:
ITEM
Fuel
Engine oil
Coolant
Front brake
CHECKS
•
Check fuel level in fuel tank.
•
Refuel if necessary.
•
Check fuel line for leakage.
•
Check oil level in engine.
•
If necessary, add recommended oil to specified level.
•
Check vehicle for oil leakage.
•
Check coolant level in reservoir.
•
If necessary, add recommended coolant to specified level.
•
Check cooling system for leakage.
•
Check operation.
•
If soft or spongy, have Benelli dealer bleed hydraulic system.
•
Check brake pads for wear.
•
Replace if necessary.
•
Check fluid level in reservoir.
•
If necessary, add specified brake fluid to specified level.
•
Check hydraulic system for leakage.
4 - 1