Self-Diagnosis - Vortice VORT KRYO-POLAR EVO 11 Notice D'emploi Et D'entretien

ENGLISH
Remote control
(Fig. 15)
All the above functions can also be performed with
the supplied remote control.
This remote control requires 2 pcs AAA batteries to
operate (battery is not supplied along with the unit).

Self-diagnosis

This machine is equipped with self-diagnosis function. If something is wrong in the machine,
the LED will show the word "E1" or "E2".
- E1 means the sensor wire for room temperature does not connect well (this wire is locatedin the center of the
evaporator).
- E2 means the sensor wire for anti-frost does not connect well (this wire is located at the side of evaporator).
As this time, please call your service centre. Please DO NOT dismantle the machine by yourselves in any
case.
"Super-cool" mode
The unit has a "Super Cool" function: you have to fill the lateral tank with 2,5 l max of water: the energy effi-
ciency and cooling capacity will increase.
To ensure that the appliance works properly in "Super Cool" mode, make sure that the tank is filled.
The procedure is as follows. (Fig.16)
16
1- Open the water tank.
15
2- Fill the water (max.
2.5L) please pay attention on
the water level of the see-
through window beneath the
water tank.
ON/OFF
SPEED UP
DOWN
TIMER
SLEEP
MODE
3- Place the water
tank back into space.
29