Bushnell Neo+ Manuel D'utilisation page 6

Registering and Updating Course Data
Setting up a free account and registering your Neo+ at www.bushnell.igolf.com is not
required. However, doing so will allow you to update the preloaded GPS course data,
and load any new courses. Registration is free and takes only a few minutes. Completing
the registration will give you access to the latest GPS data for use on your device.
1. Using the provided cable, connect one end to the mini USB port on the front of
your Neo
will indicate "USB Mode" and your computer will recognize it as a standard USB
mass storage device (no driver is required).
Go to www.bushnell.igolf.com, select 'Register Now' , and enter the requested
2.
information, clicking "Next" and following the directions until your registration
is complete.
Once your Neo
+
or download a new course to it at anytime. First make sure your Neo
the computer and that you are logged in to your iGolf.com account. Then, simply repeat
these steps to update existing courses* or download other courses to your Neo
1. Select 'GPS Courses' from the header menu, enter the name of a golf course in
the search bar, and select the 'Search' button.
2. Select the desired course from the results list to access the course download
page.
3. Select 'Download GPS & Scorecard' to download the selected course files to
your Neo
*Note: If you only play a limited number of courses on a regular basis, we recommend you update
individual courses (or load new courses) one at a time. A "full sync" to update all the preloaded courses
may take up to half an hour (depending on your download speed and other factors).
6 6
Introduction
and attach the other end to a USB port on your computer. The display
+
has been registered, you may update the GPS data for an existing course
.
+
is connected to
+
.
+