Power On/Off And Backlight - Bushnell Neo+ Manuel D'utilisation

Power On
• Press and hold the power button until "Bushnell Neo
seconds).
Power Off
• Press and hold the power button until the screen goes blank*.
Backlight On/Off
• From any screen, press the power button to turn the backlight on.
• Press power button again to turn the backlight off.
* Note: the unit will automatically power off after 45 minutes if no buttons are pressed.
To override this, enter the OPTIONS menu, select SETTINGS and change the AUTO OFF
setting to "OFF".
Start Up

Power On/Off and Backlight

" appears (about 2
+
11