ENGLISH
1. Remove single screw in the middle of the back cover of the LAN Scout™
Jr. 2 with a #2 Phillips head screwdriver. Remove battery door.
2. Remove and recycle exhausted AAA batteries.
3. Insert two fresh AAA batteries following proper orientation, as marked
inside the battery compartment. (the spring contact is negative and the
button contact is positive).
4. Replace battery door and screw, taking care not to over-tighten it.
Turn instrument off and disconnect any cables. Clean the instrument by using a
damp cloth. Do not use abrasive cleaners or solvents.
Remove the batteries when instrument is not in use for a prolonged period of
time. Do not expose to high temperatures or humidity. After a period of storage in
extreme conditions exceeding the limits mentioned in the Specifications section,
allow the instrument to return to normal operating conditions before using it.
Do not place equipment and its accessories in the trash. Items must
be properly disposed of in accordance with local regulations. Prior
to disposal of this product, please contact Klein Tools for proper
disposal options.
8
BATTERY REPLACEMENT - FIG. 5
FIG. 5
www.kleintools.com/warranty
DISPOSAL RECYCLE
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street Lincolnshire, IL 60069
1-800-553-4676
customerservice@kleintools.com
www.kleintools.com
WARRANTY
CLEANING
STORAGE