Customer Service - Klein Tools HVCT1 Manuel D'instructions

BATTERY REPLACEMENT
1. Unscrew the probe from the tester (Fig. 2).
2. Slide the inner cylinder out of the main housing (Fig. 3).
3. Slide the battery out of its slot (Fig. 4) and replace with a new battery (9V), ensuring connection with correct polarity (Fig. 5).
4. Slide the new battery into the slot.
5. Slide the inner cylinder all the way into the main housing until the contact screw threads are visible through the top hole of the
housing (Fig. 6).
6. Screw the probe firmly into place.
Be sure tester is turned off and wipe with a clean, dry lint-free cloth. Do not use abrasive cleaners or solvents.
If the tester is not to be used for periods of longer than 60 days, remove the battery and store separately from the
tester. Transport and store the tester in the supplied carrying case.
Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local
regulations. Please see www.epa.gov or www.erecycle.org for additional information.
MAINTENANCE
Fig. 2
Fig. 4
www.kleintools.com/warranty
DISPOSAL / RECYCLE

CUSTOMER SERVICE

KLEIN TOOLS, INC.
Lincolnshire, IL 60069 USA
hisupport@kleintools.com
www.kleintools.com
Fig. 5
CLEANING
STORAGE
WARRANTY
450 Bond Street
Fig. 3
Threads
Fig. 6