Operation - Zenoah BCZ260L Manuel D'utilisation

8. Fit the nut (G).
9. Hold the shaft of the spanner as close to the blade
guard as possible.
10. Turn the spanner in the opposite direcection from
which the grass blade rotates to a tourque of 35-50
Nm (3.5-5kpm).
Note: (Left-hand thread).
WARNING: When you use grass blades,
Use the harness and attach it to the
suspension ring.
To assemble the two-piece shaft
(EXZ260L)
1. Turn the knob to loosen the coupling.
2. Align the tab of the attachment (A) with the arrow of
the coupling (B).
B
3. Push the attachment into the coupling until it snaps
into place.
Fuel
CAUTION: This product have a two-stroke
engine and must always run on a mixture of
gasoline and two-stroke oil.
14
4. Tighten the knob fully.
To disassemble the two-piece shaft
(EXZ260L)
1. Turn the knob 3 turns or more to loosen the
A
2. Push and hold the button (C).
3. Hold the engine end tight.
4. Pull the attachment straight out of the coupling.

Operation

Gasoline
coupling.
C
CAUTION: Always use a quality gasoline/oil
mixture of at least 90 octane (RON). There
is a risk that use of lower octane grade
causes knocking. This gives rise to high
353 - 003 - 06.01.2018