Assembly - Installation - Rowenta CLASSIC Mode D'emploi

• This appliance is intended for domestic use only. It should therefore not be used for
any industrial applications.
• Do not operate your appliance in any room where there is lots of dust or a fire risk.
• Never insert any objects inside the appliance (e.g.: needles...)
• Never pull on the power lead or the appliance itself, even to unplug the power plug
from the wall socket.
• Always unwind the power lead completely before using the appliance.
• The guarantee will cease to apply in the event of any damage caused by incorrect
use of the appliance.
• If the power lead is damaged, it must be replaced either by the manufacturer, its
after-sales department or a similarly qualified person so as to avoid any danger.
VERY IMPORTANT
• NEVER ALLOW WATER TO GET INSIDE THE APPLIANCE.
• NEVER TOUCH THE APPLIANCE IF YOUR HANDS ARE WET.
• Always keep the appliance 50cm away from any object (walls, curtains,
aerosols...)
• Before operating your appliance always make sure that it:
has been fully assembled as indicated in the assembly instructions,
has been placed on a stable surface,
is in its normal operating position (on its legs).
VOLTAGE
Before using your appliance for the first time, please check that the voltage of your
mains installation is the same as that shown on the appliance and that your mains
supply is suitable for the power shown on the appliance.
Your appliance can function with a non-earthed power socket.
Your appliance is a class II appliance (double electrical insulation
ASSEMBLY – INSTALLATION
Your appliance comes unassembled. For your safety, it is very important to assemble
it correctly before using it for the first time.
Please refer to diagrams 3, 4, 5, 6, 7
The installation of the appliance and its use must nevertheless be compliant with the
current standards in your country.
OPERATING MOD. VU6140
IMPORTANT: When not using your appliance, we recommend you unplug it.
2
).