gdw 1332 Instructions De Montage page 5

Volkswagen Polo 3 + 5D
2001 - ....
Ref. 1332
Fitting instructions
1) Disassemble the bumper and permanently remove the metal buffer beam.
2) Shove afterwards the tow bar with the supporting arms in de openings in the rear of the chassis beams till
points (A) of the tow bar are matching with the provided drillings in the outside of the chassis beam.
The holes are sealed with adhesive tape which has to be removed. Insert the washers and the bolts and shove
now the tow bar as deep as possible in the chassis. Tighten afterwards the bolts firmly.
3) Assemble (*) and tighten also firmly.
4) Make an incision in the bumper as on sketch enclosed. Assemble afterwards the bumper by shoving him over
the ball.
Composition
1 tow bar reference 1332
1 ball T45J006
4 bolts M12x70
4 security nuts M12
2 mounting tubes T45
2 mounting pieces T45
1 security shackle (800053)
1 mounting socket P04
4 washers 30x10,5x2,5
4 bolts M10x35
4 security washers M10
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(*)
(*)
(*)
(*)
(A)
(A)
(A)
All bolts and nuts: quality 8.8