Philips Lumea IPL 9000 Serie Mode D'emploi page 17

18
English
1
2
3
4
5
24 hrs
7 Try each setting on your skin if comfortable:
- When the 'READY to flash' light is white, press the flash button on the
handle once, to treat one spot with setting ➀
The device makes a soft popping sound. The flash gives you a warm
sensation.
• You will see a flash of light •
Note: You can toggle through the light intensity settings by pressing the
toggle button.
- Move to next area. Treat one spot with setting ➁
- Move to next area. Treat one spot with setting ➂
- Move to next area. Treat one spot with setting ➃
- Move to next area. Treat one spot with setting ➄
8 Wait 24 hours.
9 Check your skin. The highest setting that...
- still felt comfortable and
- did not show a skin reaction (e.g. redness, irritation, rash)
... is the setting to start the treatment with.