Philips Lumea IPL 9000 Serie Mode D'emploi page 12

- Always check the device before you use it. Make sure that the
SmartSkin sensor window is clean when using the device, to avoid
improper operation (see 'D Clean & store after treatment').
- The adapter, light exit window and the filter of the attachments
can become very hot ( >210 °C/>410 °F ) during usage. Always let
the adapter, the light exit window as well as the filter and inner
parts of the attachments cool down before you touch them.
- This device has a detachable power supply unit that is IEC
60601-1 and IEC 60950-1 class II compliant. Only use the adapter
provided with this device. Do not use an extension cord. The
reference number (AD2069x20020HF) can be found on your
device. The 'x' in this number refers to the plug type for your
country.
- Never leave the product unattended when it is plugged in.
- Always unplug the product when it is fully charged.
- Do not expose the device to direct sunlight or to high
temperatures (near hot stoves, in microwave ovens or on
induction cookers). Batteries may explode if overheated.
- If the battery is damaged or leaking, avoid contact with skin or
eyes. If this occurs, immediately rinse well with water and seek
medical attention.
- If the device behaves in a different way during your normal routine
(e.g. abnormal smell or vibrations, longer charging time) stop using
and charging your device and contact customer support for help.
- Follow the recommended treatment schedule. Increasing the
frequency, especially in the initial phase, can increase the risk of
skin reactions.
13
English