Accessories - RIDGID K-3800 Mode D'emploi

K-3800 Drain Cleaning Machine
Figure 16 – Position New Cable Under Bracket
NOTE! If cable will not fit under bracket, loosen the
two bolts at the drum back.
4. With cable end under bracket, retighten bolts to
clamp cable firmly against the back wall of the drum.
5. Lay drum on its back and push cable into drum.
Guide tube will evenly distribute the cable around the
drum.
6. Reassemble inner drum, front bearing and E-clips
(Figure 17).
7. Mount drum on machine as outlined previously.
Figure 17 – Reassemble Inner Drum, Front Bracket and
E-Clips
12

Accessories

WARNING
been designed to function with the K-3800 Drain Cleaning
Machine. Other accessories suitable for use with other
tools may become hazardous when used on the K-3800.
To prevent serious injury, use only the accessories listed
below.
Accessories
Catalog Model
No.
55002 A-380
55007 A-381
41937
59230
59225
55017
55012 A-381-A
60087
Sink Drum Cables
Catalog Model
No.
56782 C-1IC
56787 C-2IC
56792 C-13IC
50652
50657
3/8" Cables (10mm)
Catalog
No.
37842
37847
37852
1/2" Cable (12mm)
Catalog
No.
37857
37862
55467
Ridge Tool Company
Only the following RIDGID products have
No. Description
",
Std Drum for /
3 1
8
",
Sink Drum for 5 /
16
— Pair of Gloves
" Cable
A-13 Pin Key for 3 /
8
" Cable
A-12 Pin Key for 1 /
2
— Transport Cart
Sink Drum w/25' x
Core Cable
— K3800 Power Feed
No. Description
" x 25' (7.6m) Inner Core
5 /
16
w/Bulb Auger
" x 25' (7.6m) Inner Core
5 /
16
w/Drop Head Auger
" x 35' (10.7m) w/Funnel Auger
5 /
16
" x 25' (7.6m) w/Funnel Auger
S-2 1 /
4
" x 35' (10.7m) w/Funnel Auger
S-3 1 /
4
Model
No. Description
C-31 50' (15m) I.C. Cable
C-32 75' (23m) I.C. Cable
C-33 100' (30m) I.C. Cable
Model
No. Description
C-44 50' (15m) I.C. Cable
C-45 75' (23m) I.C. Cable
C-46 90' (27m) I.C. Cable
" Cable
/
2
" Cable
1 /
4
" Inner
5 /
16