Auto Wall- Mount Adjustment (Sold Separately); Rear Panel - Samsung 4 Serie Manuel De L'utilisateur

Auto Wall- mount adjustment (Sold separately)

Once the auto wall mount is installed, the position of your TV can be easily adjusted.

Rear Panel

Serial Cable(1P to 1P)(Not supplied)
Entering the menu
1 Press the ▲, ▼, ◄ or ► button on your remote control.
➢
The Wall Mount Adjustment screen is displayed.
➢
If the Wall Mount Adjustment screen is not displayed when
clicking on a direction button while watching your TV, use the
menu to display that screen.
• Press the MENU button to display the menu. Press the ▲
or ▼ button to select Setup, then press the ENTER button.
• Press the ▲ or ▼ button to select Wall-Mount
Adjustment, then press the ENTER button.
Remembering the Position
 Adjust to the desired position using the ▲, ▼, ◄, ► buttons.
➢
If you press an arrow button when no OSD is displayed on the
TV screen, the Adjustment screen appears.
➢
Press the INFO button to reset. Press the ◄ or ► button to
select Yes, then press the ENTER button. The position is
initialized to the default setting.
 Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position1, Position or Position in order to save the current
position.
➢
To not save the current position, press the RETURN button.
➢
When selecting a save mode, you cannot use the Color
buttons.
4 Press the ENTER button to save.
➢
When Position1 is selected, the message Current position
saved as Position1 is displayed.
5 Press the ENTER button.
➢
The saved Position appears on the left side of the OSD.
English - 4
Auto Wall-Mount
TV/DTV
Plug & Play
Language : English
Time
Change PIN
- / --
Parental Lock
Subtitle
Teletext Language : ----
Preference
Wall-Mount Adjustment
► ►
Position
1 2 3
Adjust Save
TTX/MIX MENU P.SIZE
GUIDE SUBT.
Save
BN59-00705A
Select a mode to save.
Position1
Position2
Position3
Move Enter
►
P
Centre
Return
Continued...