Installing Batteries in the Remote Control
1
Lift the cover at the back of the remote control upward as
shown in the figure.
Install two AAA size batteries.
➢
Make sure to match the "+" and "–" ends of the
batteries with the diagram inside the compartment.
Do not mix battery types, i.e. alkaline and manganese.
Close the cover as shown in the figure.
➢
Remove the batteries and store them in a cool and dry
place if you won't be using the remote control for a long
time. The remote control can be used up to about 23 feet
from the TV. (Assuming typical TV usage, the batteries last
for about one year.)
➢
If the remote control doesn't work! Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
Switching Your Television On and Off
The mains lead is attached to the rear of the television.
1
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
Press the
(Power) button (On/Off) on the front of the television or press the POWER button on
the remote control to switch the television on. The channel that you were watching last is re-selected
automatically. If you have not yet stored any channels, no clear picture appears. Refer to Storing
Channels Automatically on page 14 or Storing Channels Manually on page 15.
➢
If the television is initially powered on, several basic customer settings proceed automatically.
Refer to Plug & Play Feature on page 10.
To switch the television off, press the
the POWER button on the remote control.
4
To switch the TV on, press the
button or number buttons on the remote control.
Viewing the Menus
1
Press the MENU button.
The main menu is displayed on the screen.
Its left side has six icons: Picture, Sound, Channel, Setup
and Input.
Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon's sub-menu.
Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4
Press the ▲/▼/◄/► button to change the selected items.
Press the RETURN button to return to the previous menu.
5
Press the EXIT button to exit from the menu.
(Power) button (On/Off) on the front of the television or press
(Power) button (On/Off) on the front of the TV or press the POWER
English -
TV/DTV
- / --
P
Mode
: Standard
Cell Light
: 7
Contrast
: 95
Brightness
: 45
Sharpness
: 20
Colour
: 50
Tint (G/R)
: G50/R50
Detailed Settings
TTX/MIX
MENU
P.SIZE
GUIDE
SUBT.
BN59-00705A