Optional Installation - Tripp-Lite SmartPro SMC10002URM Manuel Du Propriétaire

Optional Installation

These connections are optional. Your UPS will function properly without these connections.
USB and RS-232 Serial
1
Communications
Use the included USB cable (see
supplied DB9 serial cable (see
connect the communication port on your
computer to the communication port of your
UPS. Install on your computer the Tripp Lite
PowerAlert Software appropriate to your
computer's operating system.
EPO Port Connection
2
This optional feature is only for those
applications which require connection to a
facility's Emergency Power Off (EPO) circuit.
When the UPS is connected to this circuit, it
enables emergency shutdown of the UPS's
inverter.
With a user-supplied cable, connect the EPO
port of your UPS (see
normally closed or normally open switch
according to the circuit diagram (see
The EPO port is not a phone line surge
suppressor; do not connect a phone line to
this port.
14-08-107-93-33B2.indb 7
) or user-
1A
) to
1B
) to a user-supplied
2A
).
2B
7
USB
1A
USB
1B
USB
2A
2B
Model: SMC15002URM
RS232
Model: SMC15002URM
Model: SMART1500RM
RS232
4-5
9/25/2014 12:29:35 PM