Complete The Installation - Axis Communications P3354 Mode D'emploi

AXIS P33/-V Network Camera Series

Complete the Installation

1. If the cables are routed along the wall, remove the side lid from the camera's dome cover.
1
Side lid
2
Dome cover
2. Rotate the black shield inside the dome cover so it does not cover the lens.
1
Black shield
3. Make sure the rubber gasket sits securely on the dome cover.
4. Clean the dome with a dry soft cloth to remove dust and finger prints and use a blower
to remove dust from the lens.
5. Attach the dome cover and tighten the screws.
22