Complete The Installation - Axis Communications P3364-LVE Guide D'installation

1 Lens
2
Screw
Adjust Focus and Zoom
NO TICE NO NO TICE TICE
Adjusting focus and zoom manually can damage the lens.
Note
• Due to the dome's refraction, the image may appear slightly out of focus once the dome
has been placed. To correct this go to the Focus Adjustment web page under Setup >
Basic Setup > Focus & Zoom, and adjust the focus again.
• When the zoom and focus are adjusted, the IR illumination is automatically aligned to
the defined angle of view.
Open the Focus Adjustment page in the web interface under Setup > Basic Setup > Focus &
Zoom, and follow the on-screen instructions. Use the image window to adjust the focus and zoom.
See the online help files for more information.

Complete the Installation

1. Rotate the black shield inside the dome cover so it does not cover the lens.
AXIS P3364-LVE Network Camera
1 2
23