LAVAZZA IDOLA Mode D'emploi page 45

The machine will activate the heating phase and the
FREE DOSE button
The machine will automatically activate the descaling
process, after the heating cycle is over.
During the descaling cycle, the FREE DOSE button
will be ON and blinking and the descaling warning lamp
will be ON to a steady light.
During the descaling cycle, the machine will auto-
matically perform intermittent supply cycles, to allow
the container to be emptied.
The descaling cycle can be temporarily interrupted by
pressing either the FREE DOSE button
by button . To start the cycle again, press the FREE
DOSE button .
MAINTENANCE AND CLEANING
will start blinking.
On/Stand-
The cycle will be temporarily interrupted when the fluid
runs out in the machine tank. Empty the container used
to collect the solution.
On/Stand-by , FREE DOSE button
ter" warning lamp
Descaling warning lamp
Remove the water tank, rinse and wash it accurately.
Fill it with drinking fresh non-carbonated water up to the
MAX. level.
In case of power supply interruption, the machine
will, upon the first power-on, request the rinsing cy-
cle.
Fit the tank with water. Place a container with a capacity
of at least 0.5 litres under the supply device.
Press the FREE DOSE button
cycle.
To end the rinsing cycle, a minimum amount of water will
have to be supplied. In case of lack of water, the cycle will
be temporarily interrupted, the machine will emit a pro-
longed acoustic signal and the "No water" warning lamp
will come on to a steady light. Top the tank up.
Then the supply has been completed, clean the machine
by means of a moist, soft cloth.
After cleaning the machine, the descaling process will
be over. The machine will be ready for use.
45
and "No wa-
will be ON to a steady light.
will be ON and blinking.
to start he rinsing
E N