LAVAZZA IDOLA Mode D'emploi page 35

Fit the supply plug into the power outlet.
Press the On/Stand-by button
on. The machine will emit an acoustic signal.
All buttons will come on to a steady white light, where-
as the alarm warning lamps will come on to a steady
orange light over an instant.
MACHINE SETTING
to switch the machine
35
The coffee machine starts the heating cycle. The On/
Stand-by button will start blinking to a light white.
The machine will be ready when the On/Stand-by button
stops blinking and the supply button lights are steadily.
By pressing one of the supply buttons during the heating
cycle, you can reserve the beverage that will be supplied at
the end of the heating cycle.
Upon the first machine start-up, you shall supply 0.5 li-
tres of water, with no capsule inserted and keeping the
lever lowered. Place a cup under the supplying spout.
Press the FREE DOSE
to end.
Open and close the lever before removing and emptying
the cup.
Empty the cup and supply one more time, by pressing the
FREE DOSE button again.
E N
button and wait for the supply