z
Hint
If the installer program does not start automatically, click "Start", and select "My
Computer". Double-click the drive letter (for example, drive E) corresponding to the
CD-ROM drive, the double-click "Setup.exe".
* The drive name may be vary, depending on the computer.
2
Click "Install Driver and Application".
3
Follow the instructions on the screen, clicking "Next",
"Continue" and "Finish".
During installation, when prompted to reboot and install the Bluetooth
USB adapter, click "OK".
z
Hint
Refer to the Operating Instructions for how to install the Bluetooth USB adapter.
Installing Network Smart Capture
Required Software:
Network Smart Capture Library 1.3
Network Smart Capture Application 1.2
1
Click "Install Network Smart Capture".
"Region selection" window appears.
2
Select your region and click "OK".
3
Select the region from the list and click "OK".
4
Follow the instructions and click "Finish" to complete the
installation.
Note
For more information about Network Smart Capture software, refer to its Help file.
To access Network Smart Capture Help
Click "Start" in the Windows taskbar, point to "programs", point to
"Network Smart Capture", and click "Help".
You can also go to: http://www.ita.sel.sony.com/support/bluetooth
To read Operating Manual
Click the "View Manual" button.
GB
7